top of page

Load data for .35 Rem. + .357 | 148gr | Sellier & Bellot LWC

Recommended Powder(s): Vihtavuori N110

.35 Rem. + .357 | 148gr | Sellier & Bellot LWC

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 148gr | Sellier & Bellot LWC
Bullet Weight:
148gr | 9.6g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.650" | 16.5mm
Caliber:
.35 Rem. load data
Case Length (l3):
1.920" | 48.8mm
Cartridge Length (C.O.L.):
1.920" | 48.8mm
Seated Depth:
0.650" | 16.5mm
Shank Seated Depth:
0.473" | 12.0mm
Case Capacity:
51.0 Grains of Water | 3.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39885 psi | 2750 bar
LID:
LID_B7262_C483
Last updated:
2025-11-14

Load data for 28 loads in caliber .35 Rem. with .357 | 148gr | Sellier & Bellot LWC bullet and 14 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
86%
34838
87%
**20
98%
[ADI AR 2207]*
<<locked>>
97%
26992
68%
**20
92%
[Accurate 5744]*
<<locked>>
84%
35491
89%
**92
92%
Accurate No. 11 FS
<<locked>>
85%
35839
90%
**15
96%
[IMR 4227]*
<<locked>>
95%
35795
90%
**05
94%
[Lovex D060]*
<<locked>>
86%
35491
89%
**92
92%
[Lovex D063]*
<<locked>>
84%
35520
89%
**92
92%
Lovex S053
<<locked>>
96%
34403
86%
**11
98%
[ReloadSwiss RS 36]*
<<locked>>
96%
34998
88%
**41
94%
SNPE Vectan BA6 1/2
<<locked>>
97%
32663
82%
**93
100%
[Shooters World Blackout]*
<<locked>>
84%
35520
89%
**92
92%
[Shooters World Buffalo Rifle]*
<<locked>>
86%
35491
89%
**92
92%
Vihtavuori N110 👍
<<locked>>
91%
35201
88%
**08
100%
[Vihtavuori N120]*
<<locked>>
96%
25048
63%
**28
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
29762
75%
**08
96%
[ADI AR 2207]*
<<locked>>
93%
23743
60%
**21
90%
[Accurate 5744]*
<<locked>>
81%
32387
81%
**23
91%
[Accurate No. 11 FS]*
<<locked>>
81%
30443
76%
**03
94%
[IMR 4227]*
<<locked>>
86%
26789
67%
**95
90%
[Lovex D060]*
<<locked>>
82%
31314
79%
**97
90%
[Lovex D063]*
<<locked>>
81%
32372
81%
**23
91%
[Lovex S053]*
<<locked>>
81%
21031
53%
**70
92%
[ReloadSwiss RS 36]*
<<locked>>
89%
27180
68%
**57
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
20436
51%
**05
99%
[Shooters World Blackout]*
<<locked>>
81%
32372
81%
**23
91%
[Shooters World Buffalo Rifle]*
<<locked>>
82%
31314
79%
**97
90%
Vihtavuori N110
<<locked>>
81%
25498
64%
**01
99%
[Vihtavuori N120]*
<<locked>>
91%
21422
54%
**10
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page